Make a 3D flyover from your Wahoo ride
Your Wahoo ELEMNT already recorded the ride as a FIT file. Download it, upload it to TrainCraft Flyover and get a 3D terrain video of the route, with photos, camera moves and elevation panels. No account connection is needed, just the file.
What a Wahoo FIT file can show
The GPS track draws the route over 3D terrain, with progress and elevation. Heart rate, power or cadence panels use sensor values only if your ride file contains them.
A finished scene sequence from one route
For activity recaps and route previews, Auto Story uses route shape, climbs, descents, and supported activity moments to produce an ordered sequence you can review scene by scene and edit in the same Studio.
In the Wahoo app, open History, pick the ride, tap the three dots, choose Share activity, then Download .fit activity.
The GPS track draws the route over 3D terrain, with progress and elevation. Heart rate, power or cadence panels use sensor values only if your ride file contains them.
Free export is 720p with stylized terrain and a TrainCraft watermark. Paid export unlocks 1080p and 1440p, satellite imagery and no watermark. Choose 16:9, 9:16, 1:1 or 4:5.
Add photos from the ride
Place photos at the climb, viewpoint or finish on the timeline. They appear during the flyover with the terrain still in view.
Export your Wahoo ride as MP4
Free export is 720p with stylized terrain and a TrainCraft watermark. Paid export unlocks 1080p and 1440p, satellite imagery and no watermark. Choose 16:9, 9:16, 1:1 or 4:5.
Open Flyover StudioFrom Wahoo file to video
- Upload FIT, GPX or TCX files with a GPS track.
- Use the FIT file straight from your Wahoo ELEMNT ride.
- Add photo stops, camera and scene keyframes.
- Show route and elevation panels, plus sensor data present in the file.
- Export MP4: free 720p, paid 1080p/1440p.
Which Wahoo computers work
Any ride file with a GPS track works, whatever the device that recorded it. These Wahoo models are the ones the official support pages cover:
- ELEMNT ACE
- ELEMNT BOLT 3
- ELEMNT ROAM 3
- ELEMNT BOLT (1st and 2nd generation)
- ELEMNT ROAM (1st and 2nd generation)
- ELEMNT (original, 2016)
Official instructions
- Wahoo support: share an activity to a third-party app
- Wahoo support: upload and share a completed ride (ACE, BOLT 3, ROAM 3)
- Wahoo support: offline activity sync (ACE, BOLT 3, ROAM 3)
- Wahoo support: retrieve ride files from ELEMNT BOLT or ROAM (1st generation)
- Wahoo support: connect an ELEMNT BOLT or ROAM to a computer
- Wahoo bike computers
Wahoo is a trademark of its owner. TrainCraft is independent and is not affiliated with or endorsed by Wahoo Fitness.
Wahoo ride to 3D flyover in four steps
- 1In the Wahoo app, open History, pick the ride, tap the three dots, choose Share activity, then Download .fit activity.
- 2Upload the FIT file to TrainCraft Flyover.
- 3Add photos, pick the camera and terrain, and set the panels.
- 4Choose the aspect ratio and export an MP4. Free export is 720p with a watermark.
FAQ
Can I make a 3D flyover from my Wahoo ride?
Yes. Download the ride as a FIT file from the Wahoo app, upload it to TrainCraft Flyover and edit the 3D route video.
Where do I find the FIT file for a Wahoo ride?
Wahoo's support page says: in the Wahoo app open History, select the ride, tap the three dots, choose Share activity and Download .fit activity. First sync the ride to the app over Bluetooth or Wi-Fi.
Is it free?
Yes, with limits: free export is 720p, stylized terrain and a TrainCraft watermark. Paid export unlocks 1080p/1440p, satellite imagery and no watermark.
Does it work with indoor rides?
Only if the file has a GPS track. Indoor data without coordinates cannot draw a route.
Do I need to connect my Wahoo account?
No. There is no Wahoo connection. You download the file yourself and upload it. TrainCraft is not affiliated with Wahoo Fitness.