Guide

How to 3D print your Strava route

From a Strava activity to a terrain model on your shelf: get the GPX file, build the model in TrainCraft and download print-ready files for your own printer or a print shop.

Make my model
Relief, route and title

Images are renders from the TrainCraft studio, not photos of prints.

Step by step

  1. 1

    Get the GPX file of your activity

    On strava.com open the activity, click the three-dot menu and choose Export GPX. This works for your own activities. A FIT or TCX file from Garmin, Wahoo, Komoot or your device works too.

  2. 2

    Open the file in the studio

    Drop the file into the TrainCraft studio, or sign in and pick an activity from your list. Frame the area around the route, choose the shape and set the size from 80 to 256 mm.

    Open the file in the studio
  3. 3

    Make the climbs stand out

    Raise the relief, add a climb profile wall coloured by gradient, flags with your own words at the start or the summit, and the forest, water, roads and buildings around the route.

    Make the climbs stand out
  4. 4

    Download the files

    The free model is one part in one colour with the route as a raised ridge, and keeps your frame, title and climb profile. The full model adds the route as separate inserts in their own colours, the climb profile coloured by gradient and a 3MF that Bambu Studio and OrcaSlicer open with a filament on every part.

  5. 5

    Print it, or hand it to a print shop

    Print the plates in your slicer and press the route inserts into their slot. No printer? Send the ZIP to a local print shop or an online print service.

    Print it, or hand it to a print shop

Print-ready, not just an STL

Most converters hand you a mesh to fix in the slicer. TrainCraft hands you a project you can start printing. The points below describe the full model.

  • Opens as a ready project

    The 3MF opens in Bambu Studio as a project with a Bambu Lab printer, a 0.4 mm nozzle, 0.20 mm layers and PLA already set. Open it, check the colours, print.

  • A filament on every part

    Terrain, route inserts, frame and lettering each carry their own colour, and the colour change for the title is already in the file.

  • Plates sorted by colour

    Parts are laid out on plates by colour, so a printer without AMS prints plate by plate. With AMS the prime tower is already placed.

  • No supports to clean off

    Terrain and inserts print flat side down without supports. Only the flags need them, and they are switched on for you.

  • Tolerances for real printers

    Slots, inserts and flag sockets leave 0.3 mm per side, because FDM plastic is never exact. Change it in the studio if your printer runs tight.

  • Numbered pieces

    Route inserts and map pieces carry numbers, and the instructions PDF shows where each one goes.

  • More than a relief

    A climb profile coloured by gradient, flags with your own words, forest, water, roads and buildings, and a sheet with the numbers of the ride.

  • Your saved activities

    Signed in, pick any activity saved in your TrainCraft account, including rides synced from Strava, instead of exporting a file.

Your activity as a terrain model

Studio renders of a real ride, Val di Sole in Trentino: 87 km and 2,499 m of climbing on a 256 mm model.

Relief, route and title
Relief, route and titleReal elevation data around your track, the route in its own colour and your title on the frame.
The route as separate inserts
The route as separate insertsThe route prints as numbered pieces that press into a slot, so a single-nozzle printer still gets a clean second colour.
Climb profile wall
Climb profile wallThe route rises as a wall that follows the climbs, exaggerated so they stand out and coloured by gradient.
Flags with your own words
Flags with your own wordsMark the start, the summit or a café stop with a small flag that plugs into the terrain.

Images are renders from the TrainCraft studio, not photos of prints.

A 3D model, a poster or Strava art?

3D terrain model

Relief you can touch, with your route in its own colour. You get files and print them yourself or at a print shop.

Printed poster

A flat map on paper, usually ordered from a shop that prints and ships it. TrainCraft ships nothing; it can add a printable sheet with the route and its numbers to put next to the model.

Strava art

A drawing made with the GPS line itself, shown on the map in Strava. Any such activity can become a 3D model too, as long as you can export its GPX.

What is in the download

One ZIP. No G-code: you slice the files for your own printer.

  • Model 3MFA Bambu Studio project with the official printer and PLA profiles, a filament on every part and the parts laid out on plates by colour. OrcaSlicer opens it the same way; other slicers read the parts and their colours.
  • Frame 3MFThe frame with your title and the filament change for the lettering.
  • STL for every partEach part as its own STL, for any slicer.
  • Instructions PDFThe colour of each part, the filament-change heights and the order to fit the inserts.
  • Sheet PDFThe printable sheet, when you add it.
  • Inlay map PDFWhere each numbered forest, water or road piece goes, when map layers print as separate pieces.

You get digital files to print yourself. Nothing is shipped.

How to print it

Any FDM printer works. A multi-colour unit saves time but is not required.

  1. 1Open the 3MF in your slicer. In Bambu Studio and OrcaSlicer the filaments and plates are already set: check that your AMS slots hold the right colours.
  2. 2Print the terrain plate first, then the plates with the route inserts, one colour per plate.
  3. 3Press the inserts into the slot in number order. They fit with 0.3 mm of clearance per side, which you can change in the studio if your printer runs tight.
  4. 4No printer? Send the ZIP to a local print shop or an online print service: the 3MF, the STL files and the instructions are all they need.

Price and free terms

The full model is a one-off purchase, or included with any subscription. You see the price before you pay.

The free model is one part with a raised route. No account or card is needed to preview it.

More on 3D printing your rides

GPX to STL studio

Upload a GPX, FIT or TCX file and build your model.

Open the studio

Terrain to STL

Shapes, frames, relief and map layers, with pictures.

See the options

Frequently asked questions

Do I need a Strava account?

No. You need a GPX, FIT or TCX file of the activity. Strava is one place to get it; a file from Garmin Connect, Wahoo, Komoot or your device works the same.

Can I print someone else’s Strava activity?

Strava lets you export the GPX of your own activities. For a gift, ask the athlete to export the file and send it to you.

Is TrainCraft connected to Strava?

TrainCraft is an independent service and is not affiliated with or endorsed by Strava. Strava is a trademark of Strava, Inc. You can connect your Strava account to TrainCraft to pick activities from a list instead of uploading files.

Which printer and slicer do I need?

Any FDM printer. The 3MF opens as a ready project in Bambu Studio and OrcaSlicer with a filament on every part; PrusaSlicer and other slicers read the parts and their colours. Without a multi-colour unit you print each colour as its own plate.

How big can the model be?

From 80 to 256 mm on the long side, the size of a common printer bed. The studio does not split bigger models into tiles.

Is my activity kept private?

The track is used only to build the model and is not stored. The files you generate stay available for download for a limited time.