Canyon Endurace CFR Di2 Geometry, Sizes & Bike Fit

Canyon Endurace CFR Di2 geometry (2026) — compare stack, reach, and every supported size, then open the TrainCraft calculator with this bike preselected.

Supported sizes

2XS, XS, S, M, L, XL

Family

endurance geometry

This bike leans toward a taller front end and a more sustainable position for longer rides.

What to compare

Stack, reach, setup

Use this guide to compare stack, reach, and stock cockpit assumptions before choosing a frame size.

Check my size with measurements Compare geometry first View original geometry source

Quick size check

What Canyon Endurace CFR Di2 size fits you?

Get an instant frame estimate, then continue into the full fit report to check cockpit reach, bar drop, and setup risks before you buy.

No account needed for this check. The full report keeps this bike preselected.

Geometry and size breakdown

Use the geometry table as context, then enter your measurements above before opening the full fit report.

Size	Stack	Reach	Top tube	Head tube	Stem	Crank	Size check
2XS	499 mm	375 mm	515 mm	88 mm	80 mm	160 mm	Check with my measurements
XS	523 mm	381 mm	528 mm	107 mm	90 mm	160 mm	Check with my measurements
S	542 mm	390 mm	550 mm	121 mm	90 mm	165 mm	Check with my measurements
M	563 mm	393 mm	560 mm	142 mm	100 mm	165 mm	Check with my measurements
L	583 mm	401 mm	573 mm	162 mm	110 mm	170 mm	Check with my measurements
XL	609 mm	419 mm	599 mm	188 mm	110 mm	170 mm	Check with my measurements

How to use this guide

Start with the size table to narrow the geometry range you actually want. Then open the calculator to compare that geometry against your body dimensions, flexibility, and fit priorities.

The TrainCraft bike fit tool models saddle height, cockpit reach, and bar drop using the frame geometry plus stock cockpit assumptions for the Canyon Endurace CFR Di2.

That is more useful than a generic height chart because two sizes can both fit your height while requiring very different stems, spacers, or saddle positions.

FAQ

What sizes are available for the Canyon Endurace CFR Di2?

TrainCraft currently tracks these Canyon Endurace CFR Di2 sizes: 2XS, XS, S, M, L, XL. The calculator uses each size's published geometry and stock cockpit assumptions to compare fit outcomes.

Can I use the TrainCraft calculator for Canyon Endurace CFR Di2 sizing?

Yes. Open the calculator from this page to preload the Canyon Endurace CFR Di2, then compare sizes against your body measurements, fit priorities, flexibility, and riding posture preferences.

What should I compare on the Canyon Endurace CFR Di2 before picking a size?

Start with stack, reach, effective top tube, and the stock stem/crank setup. TrainCraft uses those numbers to estimate cockpit reach, bar drop, saddle position, and how much adjustment headroom each size leaves.