Language

Bianchi Oltre vs Orbea Orca Aero M30i LTD: geometry and fit comparison

Matched sizes, stack and reach deltas, and a fit check against your own body instead of guessing from two separate size charts.

2026race geometry
Bianchi Oltre
6 sizes: 47, 50, 53, 55, 57, 59
Full size guide
2026race geometry
Orbea Orca Aero M30i LTD
7 sizes: 47, 49, 51, 53, 55, 57, 60
Full size guide
In one look

The Bianchi Oltre is built as a race geometry frame, the Orbea Orca Aero M30i LTD as a race geometry frame. The Orbea Orca Aero M30i LTD cockpit runs about 17 mm shorter, a noticeably more compact position. The Orbea Orca Aero M30i LTD stack is slightly taller, about 5 mm, which is not enough to change the position by itself.

Switching from a Bianchi Oltre?

Your closest Orbea Orca Aero M30i LTD size, and what will still feel different about the position.

You ride the Bianchi Oltre inTake the Orbea Orca Aero M30i LTD inThe position will feel
474725 mm taller · 15 mm shorterDifferent position
504717 mm taller · 22 mm shorterDifferent position
534918 mm shorter
555117 mm shorter
57534 mm taller · 17 mm shorterDifferent position
59555 mm taller · 16 mm shorterDifferent position

Which one fits you better?

Run the same measurements through both frames. The likely size and the full fit report can differ more than the spec sheets suggest.

Quick size check

What Bianchi Oltre size fits you?

Get an instant frame estimate, then continue into the full fit report to check cockpit reach, bar drop, and setup risks before you buy.

No account needed for this check. The full report keeps this bike preselected.

Quick size check

What Orbea Orca Aero M30i LTD size fits you?

Get an instant frame estimate, then continue into the full fit report to check cockpit reach, bar drop, and setup risks before you buy.

No account needed for this check. The full report keeps this bike preselected.

FAQ

Which has the taller front end: Bianchi Oltre or Orbea Orca Aero M30i LTD?

The Orbea Orca Aero M30i LTD stack is slightly taller, about 5 mm, which is not enough to change the position by itself.

Can the same rider take different sizes on these two bikes?

Yes, and it happens often: frame labels are not standardized. Use the matched-size table for geometry, then run the fit check below with your own measurements for each bike.

Free tools are just the start

TrainCraft builds structured training plans and adapts them when life gets in the way — powered by real fatigue science (CTL/ATL/TSB). Free to start.