Language

Allied ABLE SRAM Force XPLR AXS vs MMR X-Grip: geometry and fit comparison

Matched sizes, stack and reach deltas, and a fit check against your own body instead of guessing from two separate size charts.

2026race geometry
Allied ABLE SRAM Force XPLR AXS
6 sizes: 48, 52, 54, 56, 58, 61
Full size guide
2026all-road geometry
MMR X-Grip
4 sizes: S, M, L, XL
Full size guide
In one look

The Allied ABLE SRAM Force XPLR AXS is built as a race geometry frame, the MMR X-Grip as a all-road geometry frame. The MMR X-Grip cockpit runs about 19 mm shorter, a noticeably more compact position. The MMR X-Grip stack is slightly taller, about 5 mm, which is not enough to change the position by itself.

Switching from a Allied ABLE SRAM Force XPLR AXS?

Your closest MMR X-Grip size, and what will still feel different about the position.

You ride the Allied ABLE SRAM Force XPLR AXS inTake the MMR X-Grip inThe position will feel
48S3 mm taller · 10 mm shorter
52S2 mm lower · 25 mm shorterDifferent position
54M10 mm taller · 20 mm shorterDifferent position
56L14 mm taller · 15 mm shorterDifferent position
58L6 mm lower · 25 mm shorterDifferent position
61XL7 mm taller · 19 mm shorterDifferent position

Which one fits you better?

Run the same measurements through both frames. The likely size and the full fit report can differ more than the spec sheets suggest.

Quick size check

What Allied ABLE SRAM Force XPLR AXS size fits you?

Get an instant frame estimate, then continue into the full fit report to check cockpit reach, bar drop, and setup risks before you buy.

No account needed for this check. The full report keeps this bike preselected.

Quick size check

What MMR X-Grip size fits you?

Get an instant frame estimate, then continue into the full fit report to check cockpit reach, bar drop, and setup risks before you buy.

No account needed for this check. The full report keeps this bike preselected.

FAQ

Which has the taller front end: Allied ABLE SRAM Force XPLR AXS or MMR X-Grip?

The MMR X-Grip stack is slightly taller, about 5 mm, which is not enough to change the position by itself.

Can the same rider take different sizes on these two bikes?

Yes, and it happens often: frame labels are not standardized. Use the matched-size table for geometry, then run the fit check below with your own measurements for each bike.

Free tools are just the start

TrainCraft builds structured training plans and adapts them when life gets in the way — powered by real fatigue science (CTL/ATL/TSB). Free to start.